Liblinphone 5.3.0

Macros | Typedefs | Enumerations | Functions
Tunnel

## Macros
#define | LINPHONE_TUNNEL(obj)
| Linphone tunnel aims is to bypass IP traffic blocking due to aggressive firewalls which typically only authorize TCP traffic with destination port 443.

## Typedefs
typedef struct _LinphoneTunnel | LinphoneTunnel
| Linphone tunnel object.
typedef struct _LinphoneTunnelConfig | LinphoneTunnelConfig
| Tunnel settings.
typedef enum _LinphoneTunnelMode | LinphoneTunnelMode
| Enum describing the tunnel modes.

## Enumerations
enum | _LinphoneTunnelMode { LinphoneTunnelModeDisable = 0 , LinphoneTunnelModeEnable = 1 , LinphoneTunnelModeAuto = 2 }
| Enum describing the tunnel modes. More...

## Functions
bool_t | linphone_core_tunnel_available (void)
| True if tunnel support was compiled.
LinphoneTunnel * | linphone_core_get_tunnel (const LinphoneCore *core)
| get tunnel instance if available
LinphoneTunnelConfig * | linphone_tunnel_config_new (void)
| Create a new tunnel configuration.
LinphoneTunnel * | linphone_tunnel_ref (LinphoneTunnel *tunnel)
| Take a reference on a LinphoneTunnel.
void | linphone_tunnel_unref (LinphoneTunnel *tunnel)
| Release a reference on a LinphoneTunnel.
void | linphone_tunnel_config_set_host (LinphoneTunnelConfig *tunnel_config, const char *host)
| Set the IP address or hostname of the tunnel server.
const char * | linphone_tunnel_config_get_host (const LinphoneTunnelConfig *tunnel_config)
| Get the IP address or hostname of the tunnel server.
void | linphone_tunnel_config_set_port (LinphoneTunnelConfig *tunnel_config, int port)
| Set tls port of server.
int | linphone_tunnel_config_get_port (const LinphoneTunnelConfig *tunnel_config)
| Get the TLS port of the tunnel server.
void | linphone_tunnel_config_set_host2 (LinphoneTunnelConfig *tunnel_config, const char *host)
| Set the IP address or hostname of the second tunnel server when using dual tunnel client.
const char * | linphone_tunnel_config_get_host2 (const LinphoneTunnelConfig *tunnel_config)
| Get the IP address or hostname of the second tunnel server when using dual tunnel client.
void | linphone_tunnel_config_set_port2 (LinphoneTunnelConfig *tunnel_config, int port)
| Set tls port of the second server when using dual tunnel client.
int | linphone_tunnel_config_get_port2 (const LinphoneTunnelConfig *tunnel_config)
| Get the TLS port of the second tunnel server when using dual tunnel client.
void | linphone_tunnel_config_set_remote_udp_mirror_port (LinphoneTunnelConfig *tunnel_config, int remote_udp_mirror_port)
| Set the remote port on the tunnel server side used to test UDP reachability.
int | linphone_tunnel_config_get_remote_udp_mirror_port (const LinphoneTunnelConfig *tunnel_config)
| Get the remote port on the tunnel server side used to test UDP reachability.
void | linphone_tunnel_config_set_delay (LinphoneTunnelConfig *tunnel_config, int delay)
| Set the UDP packet round trip delay in ms for a tunnel configuration.
int | linphone_tunnel_config_get_delay (const LinphoneTunnelConfig *tunnel_config)
| Get the UDP packet round trip delay in ms for a tunnel configuration.
LinphoneTunnelConfig * | linphone_tunnel_config_ref (LinphoneTunnelConfig *tunnel_config)
| Increment the refcount of LinphoneTunnelConfig object.
void | linphone_tunnel_config_unref (LinphoneTunnelConfig *tunnel_config)
| Decrement the refcount of LinphoneTunnelConfig object.
void | linphone_tunnel_config_set_user_data (LinphoneTunnelConfig *tunnel_config, void *user_data)
| Store a user data in the tunnel config object.
void * | linphone_tunnel_config_get_user_data (LinphoneTunnelConfig *tunnel_config)
| Retrieve user data from the tunnel config.
void | linphone_tunnel_add_server (LinphoneTunnel *tunnel, LinphoneTunnelConfig *tunnel_config)
| Add a tunnel server configuration.
void | linphone_tunnel_remove_server (LinphoneTunnel *tunnel, LinphoneTunnelConfig *tunnel_config)
| Remove a tunnel server configuration.
const bctbx_list_t * | linphone_tunnel_get_servers (const LinphoneTunnel *tunnel)
| Get added servers.
void | linphone_tunnel_clean_servers (LinphoneTunnel *tunnel)
| Remove all tunnel server addresses previously entered with linphone_tunnel_add_server().
void | linphone_tunnel_set_mode (LinphoneTunnel *tunnel, LinphoneTunnelMode mode)
| Set the tunnel mode.
LinphoneTunnelMode | linphone_tunnel_get_mode (const LinphoneTunnel *tunnel)
| Get the tunnel mode.
void | linphone_tunnel_enable_dual_mode (LinphoneTunnel *tunnel, bool_t dual_mode_enabled)
| Sets whether or not to use the dual tunnel client mode.
bool_t | linphone_tunnel_dual_mode_enabled (const LinphoneTunnel *tunnel)
| Get the dual tunnel client mode.
bool_t | linphone_tunnel_get_activated (const LinphoneTunnel *tunnel)
| Returns whether the tunnel is activated.
bool_t | linphone_tunnel_connected (const LinphoneTunnel *tunnel)
| Check whether the tunnel is connected.
void | linphone_tunnel_reconnect (LinphoneTunnel *tunnel)
| Force reconnection to the tunnel server.
void | linphone_tunnel_enable_sip (LinphoneTunnel *tunnel, bool_t enable)
| Set whether SIP packets must be directly sent to a UA or pass through the tunnel.
bool_t | linphone_tunnel_sip_enabled (const LinphoneTunnel *tunnel)
| Check whether tunnel is set to transport SIP packets.
void | linphone_tunnel_set_http_proxy (LinphoneTunnel *tunnel, const char *host, int port, const char *username, const char *passwd)
| Set an optional http proxy to go through when connecting to tunnel server.
void | linphone_tunnel_get_http_proxy (LinphoneTunnel *tunnel, const char **host, int *port, const char **username, const char **passwd)
| Retrieve optional http proxy configuration previously set with linphone_tunnel_set_http_proxy().
void | linphone_tunnel_set_http_proxy_auth_info (LinphoneTunnel *tunnel, const char *username, const char *passwd)
| Set authentication info for the http proxy.
void | linphone_tunnel_set_username (LinphoneTunnel *tunnel, const char *username)
| Set the username.
const char * | linphone_tunnel_get_username (LinphoneTunnel *tunnel)
| Get the username.
void | linphone_tunnel_set_domain (LinphoneTunnel *tunnel, const char *domain)
| Set the domain.
const char * | linphone_tunnel_get_domain (LinphoneTunnel *tunnel)
| Get the domain.
void | linphone_tunnel_simulate_udp_loss (LinphoneTunnel *tunnel, bool_t enabled)

## Detailed Description

## Macro Definition Documentation

## ◆ LINPHONE_TUNNEL

#define LINPHONE_TUNNEL | ( |  | obj | ) |

Value:
BELLE_SIP_CAST(obj, LinphoneTunnel)
LinphoneTunnel
struct _LinphoneTunnel LinphoneTunnel
Linphone tunnel object.
Definition types.h:1248

Linphone tunnel aims is to bypass IP traffic blocking due to aggressive firewalls which typically only authorize TCP traffic with destination port 443.

Its principle is tunneling all SIP and/or RTP traffic through a single secure https connection up to a detunnelizer server.
This set of methods enhance LinphoneCore functionalities in order to provide an easy to use API to

- provision tunnel servers IP addresses and ports. This functionality is an option not implemented under GPL. Availability can be check at runtime using function linphone_core_tunnel_available()
- start/stop the tunneling service
- perform auto-detection whether tunneling is required, based on a test of sending/receiving a flow of UDP packets.

It takes in charge automatically the SIP registration procedure when connecting or disconnecting to a tunnel server. No other action on LinphoneCore is required to enable full operation in tunnel mode.

Provision is done using object LinphoneTunnelConfig created by function linphone_tunnel_config_new(). Functions linphone_tunnel_config_set_host() and linphone_tunnel_config_set_port() allow to point to tunnel server IP/port. Once set, use function linphone_tunnel_add_server() to provision a tunnel server.
Finally tunnel mode configuration is achieved by function linphone_tunnel_set_mode().
Tunnel connection status can be checked using function linphone_tunnel_connected().

Bellow pseudo code that can be use to configure, enable, check state and disable tunnel functionality:

LinphoneTunnel *tunnel = linphone_core_get_tunnel(linphone_core);
LinphoneTunnelConfig *config=linphone_tunnel_config_new(); //instantiate tunnel configuration
linphone_tunnel_config_set_host(config, "tunnel.linphone.org"); //set tunnel server host address
linphone_tunnel_config_set_port(config, 443); //set tunnel server port
linphone_tunnel_add_server(tunnel, config); //provision tunnel config
linphone_tunnel_set_mode(tunnel, LinphoneTunnelModeEnable); //activate the tunnel unconditional
while (!linphone_tunnel_connected(tunnel)) { //wait for tunnel to be ready
linphone_core_iterate(linphone_core); //schedule core main loop
ms_sleep(100); //wait 100ms
}
LinphoneCall *call = linphone_core_invite(linphone_core,"sip:foo@example.org"); //place an outgoing call
linphone_call_ref(call); //acquire a reference on the call to avoid deletion after completion
//...
linphone_core_terminate_call(linphone_core,call);
while (linphone_call_get_state(call) != LinphoneCallReleased) { //wait for call to be in release state
linphone_core_iterate(linphone_core); //schedule core main loop
ms_sleep(100); //wait 100ms
}
linphone_tunnel_set_mode(tunnel, LinphoneTunnelModeDisable); //deactivate tunnel
linphone_call_unref(call); //release reference on the call
linphone_core_terminate_call
MS2_DEPRECATED LinphoneStatus linphone_core_terminate_call(LinphoneCore *core, LinphoneCall *call)
Terminates a call.
linphone_core_invite
LinphoneCall * linphone_core_invite(LinphoneCore *core, const char *url)
Initiates an outgoing call.
linphone_call_get_state
LinphoneCallState linphone_call_get_state(const LinphoneCall *call)
Retrieves the call's current state.
LinphoneCall
struct _LinphoneCall LinphoneCall
This object represents a call issued or received by the LinphoneCore.
Definition c-types.h:267
linphone_call_ref
LinphoneCall * linphone_call_ref(LinphoneCall *call)
Acquire a reference to the call.
linphone_call_unref
void linphone_call_unref(LinphoneCall *call)
Release reference to the call.
linphone_core_iterate
void linphone_core_iterate(LinphoneCore *core)
Main loop function.
linphone_tunnel_connected
bool_t linphone_tunnel_connected(const LinphoneTunnel *tunnel)
Check whether the tunnel is connected.
linphone_core_get_tunnel
LinphoneTunnel * linphone_core_get_tunnel(const LinphoneCore *core)
get tunnel instance if available
linphone_tunnel_set_mode
void linphone_tunnel_set_mode(LinphoneTunnel *tunnel, LinphoneTunnelMode mode)
Set the tunnel mode.
linphone_tunnel_config_set_port
void linphone_tunnel_config_set_port(LinphoneTunnelConfig *tunnel_config, int port)
Set tls port of server.
linphone_tunnel_add_server
void linphone_tunnel_add_server(LinphoneTunnel *tunnel, LinphoneTunnelConfig *tunnel_config)
Add a tunnel server configuration.
linphone_tunnel_config_new
LinphoneTunnelConfig * linphone_tunnel_config_new(void)
Create a new tunnel configuration.
linphone_tunnel_config_set_host
void linphone_tunnel_config_set_host(LinphoneTunnelConfig *tunnel_config, const char *host)
Set the IP address or hostname of the tunnel server.
LinphoneTunnelConfig
struct _LinphoneTunnelConfig LinphoneTunnelConfig
Tunnel settings.
Definition types.h:1254
LinphoneTunnelModeDisable
@ LinphoneTunnelModeDisable
The tunnel is disabled.
Definition types.h:1261
LinphoneTunnelModeEnable
@ LinphoneTunnelModeEnable
The tunnel is enabled.
Definition types.h:1262

## Enumeration Type Documentation

## ◆ _LinphoneTunnelMode

enum _LinphoneTunnelMode

Enum describing the tunnel modes.

Enumerator
LinphoneTunnelModeDisable | The tunnel is disabled.
LinphoneTunnelModeEnable | The tunnel is enabled.
LinphoneTunnelModeAuto | The tunnel is enabled automatically if it is required.

## Function Documentation

## ◆ linphone_core_get_tunnel()

LinphoneTunnel * linphone_core_get_tunnel | ( | const LinphoneCore * | core | ) |

get tunnel instance if available

Parameters

  core | core object

Returns
  LinphoneTunnel or NULL if not available.

## ◆ linphone_core_tunnel_available()

bool_t linphone_core_tunnel_available | ( | void |  | ) |

True if tunnel support was compiled.

Returns
  TRUE if library was built with tunnel, FALSE otherwise

## ◆ linphone_tunnel_add_server()

void linphone_tunnel_add_server | ( | LinphoneTunnel * | tunnel,
|  | LinphoneTunnelConfig * | tunnel_config )

Add a tunnel server configuration.

Parameters

  tunnel | LinphoneTunnel object
  tunnel_config | LinphoneTunnelConfig object

## ◆ linphone_tunnel_clean_servers()

void linphone_tunnel_clean_servers | ( | LinphoneTunnel * | tunnel | ) |

Remove all tunnel server addresses previously entered with linphone_tunnel_add_server().

Parameters

  tunnel | LinphoneTunnel object

## ◆ linphone_tunnel_config_get_delay()

int linphone_tunnel_config_get_delay | ( | const LinphoneTunnelConfig * | tunnel_config | ) |

Get the UDP packet round trip delay in ms for a tunnel configuration.

Parameters

  tunnel_config | LinphoneTunnelConfig object

Returns
  The UDP packet round trip delay in ms.

## ◆ linphone_tunnel_config_get_host()

const char * linphone_tunnel_config_get_host | ( | const LinphoneTunnelConfig * | tunnel_config | ) |

Get the IP address or hostname of the tunnel server.

Parameters

  tunnel_config | LinphoneTunnelConfig object

Returns
  The tunnel server IP address or hostname.

## ◆ linphone_tunnel_config_get_host2()

const char * linphone_tunnel_config_get_host2 | ( | const LinphoneTunnelConfig * | tunnel_config | ) |

Get the IP address or hostname of the second tunnel server when using dual tunnel client.

Parameters

  tunnel_config | LinphoneTunnelConfig object

Returns
  The tunnel server IP address or hostname.

## ◆ linphone_tunnel_config_get_port()

int linphone_tunnel_config_get_port | ( | const LinphoneTunnelConfig * | tunnel_config | ) |

Get the TLS port of the tunnel server.

Parameters

  tunnel_config | LinphoneTunnelConfig object

Returns
  The TLS port of the tunnel server

## ◆ linphone_tunnel_config_get_port2()

int linphone_tunnel_config_get_port2 | ( | const LinphoneTunnelConfig * | tunnel_config | ) |

Get the TLS port of the second tunnel server when using dual tunnel client.

Parameters

  tunnel_config | LinphoneTunnelConfig object

Returns
  The TLS port of the tunnel server

## ◆ linphone_tunnel_config_get_remote_udp_mirror_port()

int linphone_tunnel_config_get_remote_udp_mirror_port | ( | const LinphoneTunnelConfig * | tunnel_config | ) |

Get the remote port on the tunnel server side used to test UDP reachability.

This is used when the mode is set auto, to detect whether the tunnel has to be enabled or not.

Parameters

  tunnel_config | LinphoneTunnelConfig object

Returns
  The remote port on the tunnel server side used to test UDP reachability

## ◆ linphone_tunnel_config_get_user_data()

void * linphone_tunnel_config_get_user_data | ( | LinphoneTunnelConfig * | tunnel_config | ) |

Retrieve user data from the tunnel config.

Parameters

  tunnel_config | the tunnel config

Returns
  the user data.

## ◆ linphone_tunnel_config_new()

LinphoneTunnelConfig * linphone_tunnel_config_new | ( | void |  | ) |

Create a new tunnel configuration.

Returns
  a LinphoneTunnelConfig object

## ◆ linphone_tunnel_config_ref()

LinphoneTunnelConfig * linphone_tunnel_config_ref | ( | LinphoneTunnelConfig * | tunnel_config | ) |

Increment the refcount of LinphoneTunnelConfig object.

Parameters

  tunnel_config | the LinphoneTunnelConfig object.

Returns
  the same LinphoneTunnelConfig object.

## ◆ linphone_tunnel_config_set_delay()

void linphone_tunnel_config_set_delay | ( | LinphoneTunnelConfig * | tunnel_config,
|  | int | delay )

Set the UDP packet round trip delay in ms for a tunnel configuration.

Parameters

  tunnel_config | LinphoneTunnelConfig object
  delay | The UDP packet round trip delay in ms considered as acceptable (recommended value is 1000 ms).

## ◆ linphone_tunnel_config_set_host()

void linphone_tunnel_config_set_host | ( | LinphoneTunnelConfig * | tunnel_config,
|  | const char * | host )

Set the IP address or hostname of the tunnel server.

Parameters

  tunnel_config | LinphoneTunnelConfig object
  host | The tunnel server IP address or hostname.

## ◆ linphone_tunnel_config_set_host2()

void linphone_tunnel_config_set_host2 | ( | LinphoneTunnelConfig * | tunnel_config,
|  | const char * | host )

Set the IP address or hostname of the second tunnel server when using dual tunnel client.

Parameters

  tunnel_config | LinphoneTunnelConfig object
  host | The tunnel server IP address or hostname.

## ◆ linphone_tunnel_config_set_port()

void linphone_tunnel_config_set_port | ( | LinphoneTunnelConfig * | tunnel_config,
|  | int | port )

Set tls port of server.

Parameters

  tunnel_config | LinphoneTunnelConfig object
  port | The tunnel server TLS port, recommended value is 443

## ◆ linphone_tunnel_config_set_port2()

void linphone_tunnel_config_set_port2 | ( | LinphoneTunnelConfig * | tunnel_config,
|  | int | port )

Set tls port of the second server when using dual tunnel client.

Parameters

  tunnel_config | LinphoneTunnelConfig object
  port | The tunnel server TLS port, recommended value is 443

## ◆ linphone_tunnel_config_set_remote_udp_mirror_port()

void linphone_tunnel_config_set_remote_udp_mirror_port | ( | LinphoneTunnelConfig * | tunnel_config,
|  | int | remote_udp_mirror_port )

Set the remote port on the tunnel server side used to test UDP reachability.

This is used when the mode is set auto, to detect whether the tunnel has to be enabled or not.

Parameters

  tunnel_config | LinphoneTunnelConfig object
  remote_udp_mirror_port | The remote port on the tunnel server side used to test UDP reachability, set to -1 to disable the feature

## ◆ linphone_tunnel_config_set_user_data()

void linphone_tunnel_config_set_user_data | ( | LinphoneTunnelConfig * | tunnel_config,
|  | void * | user_data )

Store a user data in the tunnel config object.

Parameters

  tunnel_config | the tunnel config
  user_data | the user data.

## ◆ linphone_tunnel_config_unref()

void linphone_tunnel_config_unref | ( | LinphoneTunnelConfig * | tunnel_config | ) |

Decrement the refcount of LinphoneTunnelConfig object.

Parameters

  tunnel_config | the LinphoneTunnelConfig object.

## ◆ linphone_tunnel_connected()

bool_t linphone_tunnel_connected | ( | const LinphoneTunnel * | tunnel | ) |

Check whether the tunnel is connected.

Parameters

  tunnel | LinphoneTunnel object

Returns
  A boolean value telling if the tunnel is connected

## ◆ linphone_tunnel_dual_mode_enabled()

bool_t linphone_tunnel_dual_mode_enabled | ( | const LinphoneTunnel * | tunnel | ) |

Get the dual tunnel client mode.

Parameters

  tunnel | LinphoneTunnel object

Returns
  TRUE if dual tunnel client mode is enabled, FALSE otherwise

## ◆ linphone_tunnel_enable_dual_mode()

void linphone_tunnel_enable_dual_mode | ( | LinphoneTunnel * | tunnel,
|  | bool_t | dual_mode_enabled )

Sets whether or not to use the dual tunnel client mode.

By default this feature is disabled. After enabling it, add a server with 2 hosts and 2 ports for the feature to work.

Parameters

  tunnel | LinphoneTunnel object
  dual_mode_enabled | TRUE to enable it, FALSE to disable it

## ◆ linphone_tunnel_enable_sip()

void linphone_tunnel_enable_sip | ( | LinphoneTunnel * | tunnel,
|  | bool_t | enable )

Set whether SIP packets must be directly sent to a UA or pass through the tunnel.

Parameters

  tunnel | LinphoneTunnel object
  enable | If true, SIP packets shall pass through the tunnel

## ◆ linphone_tunnel_get_activated()

bool_t linphone_tunnel_get_activated | ( | const LinphoneTunnel * | tunnel | ) |

Returns whether the tunnel is activated.

If mode is set to auto, this gives indication whether the automatic detection determined that tunnel was necessary or not.

Parameters

  tunnel | the LinphoneTunnel

Returns
  TRUE if tunnel is in use, FALSE otherwise.

## ◆ linphone_tunnel_get_domain()

const char * linphone_tunnel_get_domain | ( | LinphoneTunnel * | tunnel | ) |

Get the domain.

Parameters

  tunnel | LinphoneTunnel object

Returns
  The domain.

## ◆ linphone_tunnel_get_http_proxy()

void linphone_tunnel_get_http_proxy | ( | LinphoneTunnel * | tunnel,
|  | const char ** | host,
|  | int * | port,
|  | const char ** | username,
|  | const char ** | passwd )

Retrieve optional http proxy configuration previously set with linphone_tunnel_set_http_proxy().

Parameters

  tunnel | LinphoneTunnel object
  host | http proxy host
  port | http proxy port
  username | Optional http proxy username if the proxy request authentication. Currently only basic authentication is supported. Use NULL if not needed.
  passwd | Optional http proxy password. Use NULL if not needed.

## ◆ linphone_tunnel_get_mode()

LinphoneTunnelMode linphone_tunnel_get_mode | ( | const LinphoneTunnel * | tunnel | ) |

Get the tunnel mode.

Parameters

  tunnel | LinphoneTunnel object

Returns
  The current LinphoneTunnelMode

## ◆ linphone_tunnel_get_servers()

const bctbx_list_t * linphone_tunnel_get_servers | ( | const LinphoneTunnel * | tunnel | ) |

Get added servers.

Parameters

  tunnel | LinphoneTunnel object

Returns
  The list of servers.

## ◆ linphone_tunnel_get_username()

const char * linphone_tunnel_get_username | ( | LinphoneTunnel * | tunnel | ) |

Get the username.

Parameters

  tunnel | LinphoneTunnel object

Returns
  The username.

## ◆ linphone_tunnel_reconnect()

void linphone_tunnel_reconnect | ( | LinphoneTunnel * | tunnel | ) |

Force reconnection to the tunnel server.

This method is useful when the device switches from wifi to Edge/3G or vice versa. In most cases the tunnel client socket won't be notified promptly that its connection is now zombie, so it is recommended to call this method that will cause the lost connection to be closed and new connection to be issued.

Parameters

  tunnel | LinphoneTunnel object

## ◆ linphone_tunnel_ref()

LinphoneTunnel * linphone_tunnel_ref | ( | LinphoneTunnel * | tunnel | ) |

Take a reference on a LinphoneTunnel.

Parameters

  tunnel | The LinphoneTunnel whose the ref counter will be increased.

Returns
  Pointer on the freshly refed LinphoneTunnel.

## ◆ linphone_tunnel_remove_server()

void linphone_tunnel_remove_server | ( | LinphoneTunnel * | tunnel,
|  | LinphoneTunnelConfig * | tunnel_config )

Remove a tunnel server configuration.

Parameters

  tunnel | LinphoneTunnel object
  tunnel_config | LinphoneTunnelConfig object

## ◆ linphone_tunnel_set_domain()

void linphone_tunnel_set_domain | ( | LinphoneTunnel * | tunnel,
|  | const char * | domain )

Set the domain.

Required for tunnel TLS client authentification. Certificate Altname or CName should be sip:<tunnel_username><tunnel_domain>

Parameters

  tunnel | LinphoneTunnel object
  domain | The domain.

## ◆ linphone_tunnel_set_http_proxy()

void linphone_tunnel_set_http_proxy | ( | LinphoneTunnel * | tunnel,
|  | const char * | host,
|  | int | port,
|  | const char * | username,
|  | const char * | passwd )

Set an optional http proxy to go through when connecting to tunnel server.

Parameters

  tunnel | LinphoneTunnel object
  host | http proxy host
  port | http proxy port
  username | Optional http proxy username if the proxy request authentication. Currently only basic authentication is supported. Use NULL if not needed.
  passwd | Optional http proxy password. Use NULL if not needed.

## ◆ linphone_tunnel_set_http_proxy_auth_info()

void linphone_tunnel_set_http_proxy_auth_info | ( | LinphoneTunnel * | tunnel,
|  | const char * | username,
|  | const char * | passwd )

Set authentication info for the http proxy.

Parameters

  tunnel | LinphoneTunnel object
  username | User name
  passwd | Password

## ◆ linphone_tunnel_set_mode()

void linphone_tunnel_set_mode | ( | LinphoneTunnel * | tunnel,
|  | LinphoneTunnelMode | mode )

Set the tunnel mode.

The tunnel mode can be 'enable', 'disable' or 'auto' If the mode is set to 'auto', the tunnel manager will try to established an RTP session with the tunnel server on the UdpMirrorPort. If the connection fail, the tunnel is automatically activated whereas the tunnel is automatically disabled if the connection succeed.

Parameters

  tunnel | LinphoneTunnel object
  mode | The desired LinphoneTunnelMode

## ◆ linphone_tunnel_set_username()

void linphone_tunnel_set_username | ( | LinphoneTunnel * | tunnel,
|  | const char * | username )

Set the username.

Required for tunnel TLS client authentification. Certificate Altname or CName should be sip:<tunnel_username><tunnel_domain>

Parameters

  tunnel | LinphoneTunnel object
  username | The username.

## ◆ linphone_tunnel_sip_enabled()

bool_t linphone_tunnel_sip_enabled | ( | const LinphoneTunnel * | tunnel | ) |

Check whether tunnel is set to transport SIP packets.

Parameters

  tunnel | LinphoneTunnel object

Returns
  A boolean value telling whether SIP packets shall pass through the tunnel

## ◆ linphone_tunnel_unref()

void linphone_tunnel_unref | ( | LinphoneTunnel * | tunnel | ) |

Release a reference on a LinphoneTunnel.

Parameters

  tunnel | The LinphoneTunnel whose the ref counter will be decreased.