%% 
%% This is file `OT1enc.def',
%% generated with the docstrip utility.
%% 
%% The original source files were:
%% 
%% ltoutenc.dtx  (with options: `OT1')
%% 
%% 
%% This is a generated file. 
%% 
%% Copyright 1993 1994 1995 The LaTeX3 Project and any individual 
%% authors listed elsewhere in this file. 
%% 
%% For further copyright information, and conditions for modification 
%% and distribution, see the file legal.txt, and any other copyright 
%% notices in this file. 
%% 
%% This file is part of the LaTeX2e system. 
%% ---------------------------------------- 
%% This system is distributed in the hope that it will be useful, 
%% but WITHOUT ANY WARRANTY; without even the implied warranty of 
%% MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 
%% 
%% For error reports concerning UNCHANGED versions of this file no 
%% more than one year old, see bugs.txt. 
%% 
%% Please do not request updates from us directly. Primary 
%% distribution is through the CTAN archives. 
%% 
%% 
%% IMPORTANT COPYRIGHT NOTICE: 
%% 
%% You are NOT ALLOWED to distribute this file alone. 
%% 
%% You are allowed to distribute this file under the condition that it 
%% is distributed together with all the files listed in manifest.txt. 
%% 
%% If you receive only some of these files from someone, complain! 
%% 
%% 
%% Permission is granted to copy this file to another file with a 
%% clearly different name and to customize the declarations in that 
%% copy to serve the needs of your installation, provided that you 
%% comply with the conditions in the file legal.txt. 
%% 
%% However, NO PERMISSION is granted to generate or to distribute a 
%% modified version of this file under its original name. 
%% 
%% You are NOT ALLOWED to change this file. 
%% 
%% 
%% MODIFICATION ADVICE: 
%% 
%% If you want to customize this file, it is best to make a copy of 
%% the source file(s) from which it was produced. Use a different 
%% name for your copy(ies) and modify the copy(ies); this will ensure 
%% that your modifications do not get overwritten when you install a 
%% new release of the standard system. You should also ensure that 
%% your modified source file does not generate any modified file with 
%% the same name as a standard file. 
%% 
%% You can then easily distribute your modifications by distributing 
%% the modified and renamed copy of the source file, taking care to 
%% observe the conditions in legal.txt; this will ensure that other 
%% users can safely use your modifications. 
%% 
%% You will also need to produce your own, suitably named, .ins file to 
%% control the generation of files from your source file; this file 
%% should contain your own preambles for the files it generates, not 
%% those in the standard .ins files. 
%% 
%% The names of the source files used are shown above. 
%% 
%% 
%% 
%%% From File: ltoutenc.dtx
\ProvidesFile{OT1enc.def}[1994/12/14 Standard LaTeX file]
\DeclareFontEncoding{OT1}{}{}
\DeclareTextAccent{\"}{OT1}{127}
\DeclareTextAccent{\'}{OT1}{19}
\DeclareTextAccent{\.}{OT1}{95}
\DeclareTextAccent{\=}{OT1}{22}
\DeclareTextAccent{\^}{OT1}{94}
\DeclareTextAccent{\`}{OT1}{18}
\DeclareTextAccent{\~}{OT1}{126}
\DeclareTextAccent{\H}{OT1}{125}
\DeclareTextAccent{\u}{OT1}{21}
\DeclareTextAccent{\v}{OT1}{20}
\DeclareTextAccent{\r}{OT1}{23}
\DeclareTextCommand{\b}{OT1}[1]
   {{\o@lign{\relax#1\crcr\hidewidth\sh@ft{29}%
     \vbox to.2ex{\hbox{\char22}\vss}\hidewidth}}}
\DeclareTextCommand{\c}{OT1}[1]
   {\leavevmode\setbox\z@\hbox{#1}\ifdim\ht\z@=1ex\accent24 #1%
    \else{\ooalign{\unhbox\z@\crcr\hidewidth\char24\hidewidth}}\fi}
\DeclareTextCommand{\d}{OT1}[1]
   {{\o@lign{\relax#1\crcr\hidewidth\sh@ft{10}.\hidewidth}}}
\DeclareTextSymbol{\AE}{OT1}{29}
\DeclareTextSymbol{\OE}{OT1}{30}
\DeclareTextSymbol{\O}{OT1}{31}
\DeclareTextSymbol{\ae}{OT1}{26}
\DeclareTextSymbol{\i}{OT1}{16}
\DeclareTextSymbol{\j}{OT1}{17}
\DeclareTextSymbol{\oe}{OT1}{27}
\DeclareTextSymbol{\o}{OT1}{28}
\DeclareTextSymbol{\ss}{OT1}{25}
\DeclareTextSymbol{\textemdash}{OT1}{124}
\DeclareTextSymbol{\textendash}{OT1}{123}
\DeclareTextSymbol{\textexclamdown}{OT1}{60}
\DeclareTextSymbol{\textquestiondown}{OT1}{62}
\DeclareTextSymbol{\textquotedblleft}{OT1}{92}
\DeclareTextSymbol{\textquotedblright}{OT1}{`\"}
\DeclareTextSymbol{\textquoteleft}{OT1}{`\`}
\DeclareTextSymbol{\textquoteright}{OT1}{`\'}
\DeclareTextCommand{\aa}{OT1}
   {{\accent23a}}
\DeclareTextCommand{\L}{OT1}
   {\leavevmode\setbox\z@\hbox{L}\hb@xt@\wd\z@{\hss\@xxxii L}}
\DeclareTextCommand{\l}{OT1}
   {{\@xxxii l}}
\DeclareTextCommand{\AA}{OT1}
   {\leavevmode\setbox\z@\hbox{h}\dimen@\ht\z@\advance\dimen@-1ex%
    \rlap{\raise.67\dimen@\hbox{\char23}}A}
\DeclareTextCommand{\textdollar}{OT1}{{%
   \ifdim \fontdimen\@ne\font >\z@
      \slshape
   \else
      \upshape
   \fi
   \char`\$}}
\DeclareTextCommand{\textsterling}{OT1}{{%
   \ifdim \fontdimen\@ne\font >\z@
      \itshape
   \else
      \fontshape{ui}\selectfont
   \fi
   \char`\$}}
\endinput
%% 
%% End of file `OT1enc.def'.