# 43.13. Porting from Oracle PL/SQL

43.13. Porting from Oracle PL/SQL
Prev | Up | Chapter 43. PL/pgSQL — SQL Procedural Language | Home | Next

## 43.13. Porting from Oracle PL/SQL #

This section explains differences between PostgreSQL's PL/pgSQL language and Oracle's PL/SQL language, to help developers who port applications from Oracle® to PostgreSQL.

PL/pgSQL is similar to PL/SQL in many aspects. It is a block-structured, imperative language, and all variables have to be declared. Assignments, loops, and conditionals are similar. The main differences you should keep in mind when porting from PL/SQL to PL/pgSQL are:

- If a name used in an SQL command could be either a column name of a table used in the command or a reference to a variable of the function, PL/SQL treats it as a column name. By default, PL/pgSQL will throw an error complaining that the name is ambiguous. You can specify `plpgsql.variable_conflict` = `use_column` to change this behavior to match PL/SQL, as explained in Section 43.11.1. It's often best to avoid such ambiguities in the first place, but if you have to port a large amount of code that depends on this behavior, setting `variable_conflict` may be the best solution.

- In PostgreSQL the function body must be written as a string literal. Therefore you need to use dollar quoting or escape single quotes in the function body. (See Section 43.12.1.)

- Data type names often need translation. For example, in Oracle string values are commonly declared as being of type `varchar2`, which is a non-SQL-standard type. In PostgreSQL, use type `varchar` or `text` instead. Similarly, replace type `number` with `numeric`, or use some other numeric data type if there's a more appropriate one.

- Instead of packages, use schemas to organize your functions into groups.

- Since there are no packages, there are no package-level variables either. This is somewhat annoying. You can keep per-session state in temporary tables instead.

- Integer `FOR` loops with `REVERSE` work differently: PL/SQL counts down from the second number to the first, while PL/pgSQL counts down from the first number to the second, requiring the loop bounds to be swapped when porting. This incompatibility is unfortunate but is unlikely to be changed. (See Section 43.6.5.5.)

- `FOR` loops over queries (other than cursors) also work differently: the target variable(s) must have been declared, whereas PL/SQL always declares them implicitly. An advantage of this is that the variable values are still accessible after the loop exits.

- There are various notational differences for the use of cursor variables.

### 43.13.1. Porting Examples #

Example 43.9 shows how to port a simple function from PL/SQL to PL/pgSQL.

Example 43.9. Porting a Simple Function from PL/SQL to PL/pgSQL

Here is an Oracle PL/SQL function:

    CREATE OR REPLACE FUNCTION cs_fmt_browser_version(v_name varchar2,
                                                      v_version varchar2)
    RETURN varchar2 IS
    BEGIN
        IF v_version IS NULL THEN
            RETURN v_name;
        END IF;
        RETURN v_name || '/' || v_version;
    END;
    /
    show errors;

Let's go through this function and see the differences compared to PL/pgSQL:

- The type name `varchar2` has to be changed to `varchar` or `text`. In the examples in this section, we'll use `varchar`, but `text` is often a better choice if you do not need specific string length limits.

- The `RETURN` key word in the function prototype (not the function body) becomes `RETURNS` in PostgreSQL. Also, `IS` becomes `AS`, and you need to add a `LANGUAGE` clause because PL/pgSQL is not the only possible function language.

- In PostgreSQL, the function body is considered to be a string literal, so you need to use quote marks or dollar quotes around it. This substitutes for the terminating `/` in the Oracle approach.

- The `show errors` command does not exist in PostgreSQL, and is not needed since errors are reported automatically.

This is how this function would look when ported to PostgreSQL:

    CREATE OR REPLACE FUNCTION cs_fmt_browser_version(v_name varchar,
                                                      v_version varchar)
    RETURNS varchar AS $$
    BEGIN
        IF v_version IS NULL THEN
            RETURN v_name;
        END IF;
        RETURN v_name || '/' || v_version;
    END;
    $$ LANGUAGE plpgsql;

Example 43.10 shows how to port a function that creates another function and how to handle the ensuing quoting problems.

Example 43.10. Porting a Function that Creates Another Function from PL/SQL to PL/pgSQL

The following procedure grabs rows from a `SELECT` statement and builds a large function with the results in `IF` statements, for the sake of efficiency.

This is the Oracle version:

    CREATE OR REPLACE PROCEDURE cs_update_referrer_type_proc IS
        CURSOR referrer_keys IS
            SELECT * FROM cs_referrer_keys
            ORDER BY try_order;
        func_cmd VARCHAR(4000);
    BEGIN
        func_cmd := 'CREATE OR REPLACE FUNCTION cs_find_referrer_type(v_host IN VARCHAR2,
                     v_domain IN VARCHAR2, v_url IN VARCHAR2) RETURN VARCHAR2 IS BEGIN';

        FOR referrer_key IN referrer_keys LOOP
            func_cmd := func_cmd ||
              ' IF v_' || referrer_key.kind
              || ' LIKE ''' || referrer_key.key_string
              || ''' THEN RETURN ''' || referrer_key.referrer_type
              || '''; END IF;';
        END LOOP;

        func_cmd := func_cmd || ' RETURN NULL; END;';

        EXECUTE IMMEDIATE func_cmd;
    END;
    /
    show errors;

Here is how this function would end up in PostgreSQL:

    CREATE OR REPLACE PROCEDURE cs_update_referrer_type_proc() AS $func$
    DECLARE
        referrer_keys CURSOR IS
            SELECT * FROM cs_referrer_keys
            ORDER BY try_order;
        func_body text;
        func_cmd text;
    BEGIN
        func_body := 'BEGIN';

        FOR referrer_key IN referrer_keys LOOP
            func_body := func_body ||
              ' IF v_' || referrer_key.kind
              || ' LIKE ' || quote_literal(referrer_key.key_string)
              || ' THEN RETURN ' || quote_literal(referrer_key.referrer_type)
              || '; END IF;' ;
        END LOOP;

        func_body := func_body || ' RETURN NULL; END;';

        func_cmd :=
          'CREATE OR REPLACE FUNCTION cs_find_referrer_type(v_host varchar,
                                                            v_domain varchar,
                                                            v_url varchar)
            RETURNS varchar AS '
          || quote_literal(func_body)
          || ' LANGUAGE plpgsql;' ;

        EXECUTE func_cmd;
    END;
    $func$ LANGUAGE plpgsql;

Notice how the body of the function is built separately and passed through `quote_literal` to double any quote marks in it. This technique is needed because we cannot safely use dollar quoting for defining the new function: we do not know for sure what strings will be interpolated from the `referrer_key.key_string` field. (We are assuming here that `referrer_key.kind` can be trusted to always be `host`, `domain`, or `url`, but `referrer_key.key_string` might be anything, in particular it might contain dollar signs.) This function is actually an improvement on the Oracle original, because it will not generate broken code when `referrer_key.key_string` or `referrer_key.referrer_type` contain quote marks.

Example 43.11 shows how to port a function with `OUT` parameters and string manipulation. PostgreSQL does not have a built-in `instr` function, but you can create one using a combination of other functions. In Section 43.13.3 there is a PL/pgSQL implementation of `instr` that you can use to make your porting easier.

Example 43.11. Porting a Procedure With String Manipulation and `OUT` Parameters from PL/SQL to PL/pgSQL

The following Oracle PL/SQL procedure is used to parse a URL and return several elements (host, path, and query).

This is the Oracle version:

    CREATE OR REPLACE PROCEDURE cs_parse_url(
        v_url IN VARCHAR2,
        v_host OUT VARCHAR2,  -- This will be passed back
        v_path OUT VARCHAR2,  -- This one too
        v_query OUT VARCHAR2) -- And this one
    IS
        a_pos1 INTEGER;
        a_pos2 INTEGER;
    BEGIN
        v_host := NULL;
        v_path := NULL;
        v_query := NULL;
        a_pos1 := instr(v_url, '//');

        IF a_pos1 = 0 THEN
            RETURN;
        END IF;
        a_pos2 := instr(v_url, '/', a_pos1 + 2);
        IF a_pos2 = 0 THEN
            v_host := substr(v_url, a_pos1 + 2);
            v_path := '/';
            RETURN;
        END IF;

        v_host := substr(v_url, a_pos1 + 2, a_pos2 - a_pos1 - 2);
        a_pos1 := instr(v_url, '?', a_pos2 + 1);

        IF a_pos1 = 0 THEN
            v_path := substr(v_url, a_pos2);
            RETURN;
        END IF;

        v_path := substr(v_url, a_pos2, a_pos1 - a_pos2);
        v_query := substr(v_url, a_pos1 + 1);
    END;
    /
    show errors;

Here is a possible translation into PL/pgSQL:

    CREATE OR REPLACE FUNCTION cs_parse_url(
        v_url IN VARCHAR,
        v_host OUT VARCHAR,  -- This will be passed back
        v_path OUT VARCHAR,  -- This one too
        v_query OUT VARCHAR) -- And this one
    AS $$
    DECLARE
        a_pos1 INTEGER;
        a_pos2 INTEGER;
    BEGIN
        v_host := NULL;
        v_path := NULL;
        v_query := NULL;
        a_pos1 := instr(v_url, '//');

        IF a_pos1 = 0 THEN
            RETURN;
        END IF;
        a_pos2 := instr(v_url, '/', a_pos1 + 2);
        IF a_pos2 = 0 THEN
            v_host := substr(v_url, a_pos1 + 2);
            v_path := '/';
            RETURN;
        END IF;

        v_host := substr(v_url, a_pos1 + 2, a_pos2 - a_pos1 - 2);
        a_pos1 := instr(v_url, '?', a_pos2 + 1);

        IF a_pos1 = 0 THEN
            v_path := substr(v_url, a_pos2);
            RETURN;
        END IF;

        v_path := substr(v_url, a_pos2, a_pos1 - a_pos2);
        v_query := substr(v_url, a_pos1 + 1);
    END;
    $$ LANGUAGE plpgsql;

This function could be used like this:

    SELECT * FROM cs_parse_url('http://foobar.com/query.cgi?baz');

Example 43.12 shows how to port a procedure that uses numerous features that are specific to Oracle.

Example 43.12. Porting a Procedure from PL/SQL to PL/pgSQL

The Oracle version:

    CREATE OR REPLACE PROCEDURE cs_create_job(v_job_id IN INTEGER) IS
        a_running_job_count INTEGER;
    BEGIN
        LOCK TABLE cs_jobs IN EXCLUSIVE MODE;

        SELECT count(*) INTO a_running_job_count FROM cs_jobs WHERE end_stamp IS NULL;

        IF a_running_job_count > 0 THEN
            COMMIT; -- free lock
            raise_application_error(-20000,
                     'Unable to create a new job: a job is currently running.');
        END IF;

        DELETE FROM cs_active_job;
        INSERT INTO cs_active_job(job_id) VALUES (v_job_id);

        BEGIN
            INSERT INTO cs_jobs (job_id, start_stamp) VALUES (v_job_id, now());
        EXCEPTION
            WHEN dup_val_on_index THEN NULL; -- don't worry if it already exists
        END;
        COMMIT;
    END;
    /
    show errors

This is how we could port this procedure to PL/pgSQL:

    CREATE OR REPLACE PROCEDURE cs_create_job(v_job_id integer) AS $$
    DECLARE
        a_running_job_count integer;
    BEGIN
        LOCK TABLE cs_jobs IN EXCLUSIVE MODE;

        SELECT count(*) INTO a_running_job_count FROM cs_jobs WHERE end_stamp IS NULL;

        IF a_running_job_count > 0 THEN
            COMMIT; -- free lock
            RAISE EXCEPTION 'Unable to create a new job: a job is currently running'; -- (1)
        END IF;

        DELETE FROM cs_active_job;
        INSERT INTO cs_active_job(job_id) VALUES (v_job_id);

        BEGIN
            INSERT INTO cs_jobs (job_id, start_stamp) VALUES (v_job_id, now());
        EXCEPTION
            WHEN unique_violation THEN -- (2)
                -- don't worry if it already exists
        END;
        COMMIT;
    END;
    $$ LANGUAGE plpgsql;

(1) | The syntax of `RAISE` is considerably different from Oracle's statement, although the basic case `RAISE` `exception_name` works similarly.
(2) | The exception names supported by PL/pgSQL are different from Oracle's. The set of built-in exception names is much larger (see Appendix A). There is not currently a way to declare user-defined exception names, although you can throw user-chosen SQLSTATE values instead.

### 43.13.2. Other Things to Watch For #

This section explains a few other things to watch for when porting Oracle PL/SQL functions to PostgreSQL.

#### 43.13.2.1. Implicit Rollback after Exceptions #

In PL/pgSQL, when an exception is caught by an `EXCEPTION` clause, all database changes since the block's `BEGIN` are automatically rolled back. That is, the behavior is equivalent to what you'd get in Oracle with:

    BEGIN
        SAVEPOINT s1;
        ... code here ...
    EXCEPTION
        WHEN ... THEN
            ROLLBACK TO s1;
            ... code here ...
        WHEN ... THEN
            ROLLBACK TO s1;
            ... code here ...
    END;

If you are translating an Oracle procedure that uses `SAVEPOINT` and `ROLLBACK TO` in this style, your task is easy: just omit the `SAVEPOINT` and `ROLLBACK TO`. If you have a procedure that uses `SAVEPOINT` and `ROLLBACK TO` in a different way then some actual thought will be required.

#### 43.13.2.2. `EXECUTE` #

The PL/pgSQL version of `EXECUTE` works similarly to the PL/SQL version, but you have to remember to use `quote_literal` and `quote_ident` as described in Section 43.5.4. Constructs of the type `EXECUTE 'SELECT * FROM $1';` will not work reliably unless you use these functions.

#### 43.13.2.3. Optimizing PL/pgSQL Functions #

PostgreSQL gives you two function creation modifiers to optimize execution: “volatility” (whether the function always returns the same result when given the same arguments) and “strictness” (whether the function returns null if any argument is null). Consult the CREATE FUNCTION reference page for details.

When making use of these optimization attributes, your `CREATE FUNCTION` statement might look something like this:

    CREATE FUNCTION foo(...) RETURNS integer AS $$
    ...
    $$ LANGUAGE plpgsql STRICT IMMUTABLE;

### 43.13.3. Appendix #

This section contains the code for a set of Oracle-compatible `instr` functions that you can use to simplify your porting efforts.

    --
    -- instr functions that mimic Oracle's counterpart
    -- Syntax: instr(string1, string2 [, n [, m]])
    -- where [] denotes optional parameters.
    --
    -- Search string1, beginning at the nth character, for the mth occurrence
    -- of string2.  If n is negative, search backwards, starting at the abs(n)'th
    -- character from the end of string1.
    -- If n is not passed, assume 1 (search starts at first character).
    -- If m is not passed, assume 1 (find first occurrence).
    -- Returns starting index of string2 in string1, or 0 if string2 is not found.
    --

    CREATE FUNCTION instr(varchar, varchar) RETURNS integer AS $$
    BEGIN
        RETURN instr($1, $2, 1);
    END;
    $$ LANGUAGE plpgsql STRICT IMMUTABLE;

    CREATE FUNCTION instr(string varchar, string_to_search_for varchar,
                          beg_index integer)
    RETURNS integer AS $$
    DECLARE
        pos integer NOT NULL DEFAULT 0;
        temp_str varchar;
        beg integer;
        length integer;
        ss_length integer;
    BEGIN
        IF beg_index > 0 THEN
            temp_str := substring(string FROM beg_index);
            pos := position(string_to_search_for IN temp_str);

            IF pos = 0 THEN
                RETURN 0;
            ELSE
                RETURN pos + beg_index - 1;
            END IF;
        ELSIF beg_index < 0 THEN
            ss_length := char_length(string_to_search_for);
            length := char_length(string);
            beg := length + 1 + beg_index;

            WHILE beg > 0 LOOP
                temp_str := substring(string FROM beg FOR ss_length);
                IF string_to_search_for = temp_str THEN
                    RETURN beg;
                END IF;

                beg := beg - 1;
            END LOOP;

            RETURN 0;
        ELSE
            RETURN 0;
        END IF;
    END;
    $$ LANGUAGE plpgsql STRICT IMMUTABLE;

    CREATE FUNCTION instr(string varchar, string_to_search_for varchar,
                          beg_index integer, occur_index integer)
    RETURNS integer AS $$
    DECLARE
        pos integer NOT NULL DEFAULT 0;
        occur_number integer NOT NULL DEFAULT 0;
        temp_str varchar;
        beg integer;
        i integer;
        length integer;
        ss_length integer;
    BEGIN
        IF occur_index <= 0 THEN
            RAISE 'argument ''%'' is out of range', occur_index
              USING ERRCODE = '22003';
        END IF;

        IF beg_index > 0 THEN
            beg := beg_index - 1;
            FOR i IN 1..occur_index LOOP
                temp_str := substring(string FROM beg + 1);
                pos := position(string_to_search_for IN temp_str);
                IF pos = 0 THEN
                    RETURN 0;
                END IF;
                beg := beg + pos;
            END LOOP;

            RETURN beg;
        ELSIF beg_index < 0 THEN
            ss_length := char_length(string_to_search_for);
            length := char_length(string);
            beg := length + 1 + beg_index;

            WHILE beg > 0 LOOP
                temp_str := substring(string FROM beg FOR ss_length);
                IF string_to_search_for = temp_str THEN
                    occur_number := occur_number + 1;
                    IF occur_number = occur_index THEN
                        RETURN beg;
                    END IF;
                END IF;

                beg := beg - 1;
            END LOOP;

            RETURN 0;
        ELSE
            RETURN 0;
        END IF;
    END;
    $$ LANGUAGE plpgsql STRICT IMMUTABLE;

Prev | Up | Next
43.12. Tips for Developing in PL/pgSQL | Home | Chapter 44. PL/Tcl — Tcl Procedural Language